Product Description
Data sheet
For which swimming pool ?
MODELS | eXO® iQ 10 | eXO® iQ 18 | eXO® iQ 22 | eXO® iQ 35 |
Volume of water treated in a temperate climate (filtration: 8 h/day) |
40 m³ |
70 m³ |
100 m³ |
150 m³ |
Nominal chlorine production | 10 g/h | 18 g/h | 22 g/h | 35 g/h |
Description:
User interface: 4-line backlit LCD screen
Operating mode(s): Normal, Boost, Low (adjustable range: 0 to 30%)
Equipment control: Filter pump: single speed pump or Zodiac® variable speed pump. 2 additional equipment: lighting, booster pump, etc.
Polarity reversal: From 2 to 8h (factory setting = 5 h)
Salt level (recommended – min.): 4 g/L – 3.3 g/L minimum
Safety:
– Temperature sensors: Chlorine production lowered in case of cold water to protect the electrode
– “Low salt” indicator light: Reduced production to protect the electrode
– “No flow” message: Production is interrupted as long as conditions are not ideal
– Mechanical flow sensor
Technical specifications
Working life of cells* | 10 000 h (titanium plates, SC6 ruthenium coating) |
Power supply | 195 W / 110-240 VAC / 50-60 Hz |
Minimum flow rate (needed to purge air from the cell) | 5 m³ / h |
Maximum flow rate (limited by pressure drops in the pipe) | 18 m³/h (Bypass mandatory over this level) |
Maximum authorised cell pressure | 2.75 bar (KPa) |
Maximum water temperature | 40°C |
Minimum water temperature | 5°C |
Length of the cell cable | 1.8 m |
Protection index | IP43 |
Cell size (l x w x h) | 32.0 x 13.5 x 11.0 cm |
Control box size (l x w x h) | 32.0 x 37.0 x 12 cm |
*Under good operating conditions |
General
Unconditionnal warranty: 3 years
Accessories included in the pack:
– Wall mounting kit
– Flow switch kit
– Reducing bushes kit
– Temperature sensor kit
Associated products:
– pH link module
– Dual Link module
Reviews
There are no reviews yet.